Malibu Boats AirMAX 240, Инструкция по установке и настройке

Страница: 34 / 82

Chapter 3: Configuration
28
Malibu Networks AirMAX“ CPE/BTS
• Test this page provides buttons to start continuous
radio transmission, start continuous Ethernet data
transmission, and stop both Ethernet and radio
transmission. These functions are intended only for
testing purposes. They should always be turned off
for normal operation since they will block wireless
LAN traffic.
• Statistics this page shows data flow characteristics.
• Management Pages (Service Levels, Subscribers,
Rules, and CPEs) these pages are for assigning
CPEs to a BTS and establishing Quality of Service.
These pages apply to the BTS only (for setting up
CPEs).
Before continuing to configure the BTS, read about the
Status page and learn what the information displayed is
all about, then go the Configuration Web Page topic and
begin configuring the BTS.
Status Web Page
The Status page is the initial screen you ll view when you
enter a CPE or BTS IP address in a web browser s URL
field. On the left of the page are navigation buttons for the
four AirMAX configuration web pages (Status, Configure,
Test, Statistics, and Policy Add CPEs). Clicking on any
of the buttons takes you to the corresponding page. Since
you re already at the Status page, that button highlights
showing you re there.
Shown on the right side of the Status page are the current
settings of the CPE or BTS system you re configuring.
Each of the fields and controls are described below. On
the Status page, these values are read-only and cannot
be changed. If you see a value you want to change, click
on the Configure button to go to an editable page.