Malibu Boats AirMAX 240, Инструкция по установке и настройке

Страница: 51 / 82

QoS Management From the BTS
45
Installation and Configuration
3
Configuration
Remote IP enter the range of remote IP addresses
that this rule will apply to. Specify both a starting
and ending address. (Start address can be
0.0.0.0.)
Remote Port enter a range of ports this rule will apply
to. Specify both a starting and ending port.
Subscriber IP enter the range of subscriber IP
addresses that this rule will match. Specify both a
starting and ending address.
Subscriber Port enter the range of subscriber ports
this rule will apply to. Specify both a starting and
ending port. Some commonly used port numbers
include:
20 FTP
21 FTP
23 TELNET
25 SMTP (e-post)
43 WHOIS
49 RLOGIN
53 DNS
70 GOPHER
79 FINGER
80 HTTP (www)
88 KERBEROS
105 PH
109 POP2 (e-post)
110 POP3 (e-post)
119 NNTP (usenet)
123 NTP
143 IMAP2, IMAP4 (e-post)
158 DMSP, PCmail (e-post)
161 SNMP
194 IRC
210 WAIS
220 IMAP3 (e-post)
540 UUCP
Type Protocol select the IP protocol where this rule
will apply; for example UDP or TCP.
Type Payload select a payload type for the rule
(audio, video or normal data). This value only
applies to UDP traffic.
Type TOS the Type of Service or Differentiated
Services Code Point (DSCP) for this rule. TOS/
DSCP is part of the IP packet header.