Malibu Boats AirMAX 240, Инструкция по установке и настройке

Страница: 49 / 82

QoS Management From the BTS
43
Installation and Configuration
3
Configuration
Name Unique subscriber name.
CPE Select the CPE that this subscriber is attached to
from the list given (showing all CPEs defined thus
far).
Max Bandwidth Select the maximum bandwidth that
the subscriber will be allowed from the drop down
list. The value selected is an integer from 0 to 7168
representing Kbps.
NAT Enable or Disable network address translation
(NAT) and DHCP for this subscriber. If NAT is
enabled, all subscriber LAN addresses will be
automatically translated into a single public IP
address.
IP The subscriber public IP address (as seen from the
Internet/WAN side).
Netmask Subscriber s network mask that controls
how many nodes a subscriber can access.
DHCP Subnet If NAT is enabled, you can manually
enter the subnet address here. If NAT is disabled,
this will be a read-only field showing the DHCP
subnet assigned.
DHCP DNS If NAT is enabled, you can manually enter
the IP addresses of up to three DNS servers,
separated by spaces for use by DHCP clients. If
NAT is disabled, this will be a read-only field.
APPLY button Click this button after making your
selections or changes.