Chapter 3: Configuration
34
Malibu Networks AirMAX“ CPE/BTS
To perform initial BTS configuration, follow these steps:
1.
Enter an SSID value for the base station. All CPEs
configured later within the cell will also use this
same value.
2.
Enter the radio channel number, from one to 14, by
using the pull down menu.
3.
Enter a power level for the radio modem (typically
use maximum).
4.
Click on Radio ON button.
5.
Enter a LAN IP for the BTS.
6.
Enter a Subnet Mask in the LAN Mask field. Later
you can change this as directed by your network
administrator.
7.
Enter a default router for the BTS (get the value
from your network administrator).
8.
Click on the APPLY button at the bottom of the
page.
The BTS unit should now be transmitting and ready to
pass Ethernet traffic. With the BTS running, you ll now
want to add CPEs to its cell area.
Содержание AirMAX 240
