Page
9
of
36
3.4. Table of settings for the cooling segment.
ATTENTION
The parameters from the table below, which are marked in gray, must not be changed.
The warranty granted by the manufacturer does not cover damage to the controller due to the
change of these parameters.
description of the function
symbol
range of the settings
factory
setting
entry in the setting mode
UC0
access code
1.2
controller operation mode
C9
0 – cooling mode
1 – heating mode
0
limitation of the lower value for
the control temperature range
1
b1
setting the temperature value from
-40
O
C to +120
O
C, every 1,0
O
C
2 (
O
C)
limitation of the upper value for
the control temperature range
1
b2
setting the temperature value from
-40
O
C to +120
O
C, every 1,0
O
C
10 (
O
C)
control hysteresis
HI
setting the temperature value:
2 (
O
C)
