Page
16
of
36
ATTENTION
Sensor damage indication also occurs if the temperature range measured by the controller is
exceeded.
5.4. Delay of switching on the chiller and the stirrer’s motoreducer after voltage decay.
Controller has the ability to protect the chiller and motoreducer in the event of momentary decays
and the appearance of the supply voltage – this is done by setting the dE parameter (see section
3.4.).
5.5. Real-time clock.
From the moment the MCH-07 controller is switched on to the power supply, yet the washing
process is not activated, the current time is displayed.
