![background image](http://html1.mh-extra.com/html/makita/dup361/dup361_technical-information_4006711010.webp)
ASSEMBLING
2
-
8
(24)
(15)
Slotted
screwdriver
(24)
9. Insert Slotted screwdriver between Trigger ass’y (24) and Link arm (15).
10. Remove Trigger ass’y (24) by twisting
Slotted screwdriver.
2
-
9
(15)
11. Remove Link arms (15).
2
-
10
(25)
(23)
(21)
12. Remove Magnet (21), Compression
spring (23) from Ball nut cover A (25).
2
-
11
13. Rotate the pin in Ball screw ass’y counterclockwise
and set as drawn in the right picture.
(12)
25
~
28
㎜
14. Remove Ball nut cover A, B (25, 13) by
loo Pan head tapping screws 2x10 (12).
(25)
(13)
2
-
13
Protrusion of
Ball nut cover A (25)
Groove of
Ball screw ass’y (26)
2. Fit the protrusion of Ball nut cover A (25)
to the groove of Ball screw ass’y (26).
1. Rotate Ball screw shaft as drawn.
2
-
12
Ball screw shaft
Ball nut
※
Be careful that the balls in ball nut fall out
if Ball nut protrudes Ball screw shaft.
The balls in ball nut fall down if Shear blade
ass’y installation side gets downward or
gets shaken.
※
Balls cannot be put back in place once balls fall out,
in that case you need to replace Ball screw ass’y
entirely.
25
~
28
㎜
Ma kita Corporation
P 10/
29
Содержание DUP361
Страница 29: ...P29 29 Saved Use history information...