![background image](http://html1.mh-extra.com/html/makita/dup361/dup361_technical-information_4006711013.webp)
3. DISASSEMBLING/ASSEMBLING of Trigger ass’y
※
Can be replaced without removing Shear blade ass’y.
DISASSEMBLING
ASSEMBLING
21. Assemble according to “1-13”- “1-19”.
1. Remove Ball screw ass’y (26) and Motor (33) from Upper housing (3) according to section
1
.
2. Remove Trigger ass’y (24) according to “2-8”.
1. If you reuse + Flat head screw M3x4 (17), apply Loctite 272 because it is an
anti-loosening thread locking nut.
2. Assemble Trigger ass’y (24) according to “2-20”.
18. The built-in image of
Flexible board is as below.
2
-
24
(16)
(15)
19. Set Link arm (15) to Shear
blade ass’y and insert
Flat fillister HD. pin 5 (16).
Shear blade
ass’y
2
-
25
2
-
26
Stop ring E-4
Long-nose
pliers
20. Assemble Stop ring E-4 by
pinching with Long-nose
pliers.
3. Component parts of Trigger ass’y are as follows.
+ Flat head screw M3x4 (17)
Lever (18)
Steel ball 2.3 (19)
Compression spring (20)
Trigger
H.S. set screw (flat point)
M3x4 (22)
3
-
1
P 13/
29
Содержание DUP361
Страница 29: ...P29 29 Saved Use history information...