Makita 0088381724142 Скачать руководство пользователя страница 5

Страница: 5 / 68

The definitions below describe the level of severity for each signal word and

the meaning of each symbol used in this manual.

Please read the manual and pay attention to these symbols.

: Read instruction manual.

DANGER

: This indicates the risk of death or frequent serious injury.

WARNING

: This indicates the risk of serious injury.

CAUTION

: This indicates the risk of light injury.

NOTICE

NOTE

: This indicates the risk of malfunction or damage to property.

: This indicates the risk of electric shock.

: This indicates the risk of fire.

: Laser warning
: Only for EU countries Do not dispose of electric equipment or

battery pack together with household waste material! In observance

of the European Directives, on Waste Electric and Electronic

Equipment and Batteries and Accumulators and Waste Batteries

and Accumulators and their implementation in accordance with

national laws, electric equipment and batteries and battery pack(s)

that have reached the end of their life must be collected separately

and returned to an environmentally compatible recycling facility.

Li-ion

: Only for EU countries

Due to the presence of hazardous components in the equipment,

waste electrical and electronic equipment, accumulators and batteries

may have a negative impact on the environment and human health.

Do not dispose of electrical and electronic appliances or

batteries with household waste!

In accordance with the European Directive on waste electrical

and electronic equipment and on accumulators and batteries and

waste accumulators and batteries, as well as their adaptation

to national law, waste electrical equipment, batteries and

accumulators should be stored separately and delivered to

a separate collection point for municipal waste, operating in

accordance with the regulations on environmental protection.

This is indicated by the symbol of the crossed-out wheeled

bin placed on the equipment.

Intended Use

This product is intended to check the locations of iron bars, plastic pipes and

wires buried in concrete, and of wooden materials and such behind walls.

Symbols

Содержание 0088381724142





































































Результаты поиска

Содержание 0088381724142

Отзывы:

Похожие инструкции для 0088381724142

Бренды по названию

Популярные бренды

Makita 0088381724142, Инструкция по эксплуатации

Результаты поиска

Содержание 0088381724142

Отзывы:

Похожие инструкции для 0088381724142

Бренды по названию

Популярные бренды