Makita 0088381724142, Инструкция по эксплуатации

Страница: 44 / 68

44
Operation
10. Scan results are shown on the
display. The scan results of the
“lower line” are shown in line 3 if the
scanner is released from the
concrete surface.
• Resin pipes, which in many cases
are not straight but are meandering,
give often their scan results as marks
located at differing positions and
depths depending on each line.
11. You can recheck scan results and the locations of buried objects if the
scanner is moved again from the position at which scan operation was
started.
• The screen (three lines) is scrolled in step with the movement of the
scanner.
1
1. The scan result screen is scrolled in
the direction of the arrow if the scan -
ner is moved as shown at left.
NOTE
• When you check scan results, apply the scanner to the same place as the
starting position of the executed scan. If the starting position is misaligned,
the correct position cannot be checked.