Makita 0088381724142 Скачать руководство пользователя

Страница: 14 / 68

WARNING - Battery product use and care

Recharge only with the charger specified by the manufacturer.

charger that is suitable for one type of battery pack may create a risk of

fire when used with another battery pack.

Charge the battery in a well-ventilated place. Do not cover the

battery and/or charger with a cloth or such when charging.

Doing

so may cause a burst and/or fire.

Use the product only with specifically designated battery packs.

Use of any other battery packs may create a risk of injury and fire.

When battery pack is not in use, keep it away from other metal

objects, like paper clips, coins, keys, nails, screws or other small

metal objects, that can make a connection from one terminal to

another.

Shorting the battery terminals together may cause burns or a

fire.

Under abusive conditions, liquid may be ejected from the battery;

avoid contact. If contact accidentally occurs, flush with water. If

liquid contacts eyes, additionally seek medical help.

Liquid ejected

from the battery may cause irritation or burns.

Do not use a battery pack or product that is damaged or modified.

Damaged or modified batteries may exhibit unpredictable behaviour

resulting in fire, explosion or risk of injury.

Do not expose a battery pack or product to fire or excessive

temperature.

Exposure to fire or temperature above 130 °C (266 °F)

may cause explosion.

Follow all charging instructions and do not charge the battery

pack or product outside the temperature range specified in the

instructions.

Charging improperly or at temperatures outside the specified range

may damage the battery and increase the risk of fire.

Use Makita battery cartridge only with products specified by

Makita.

Содержание 0088381724142





































































Результаты поиска

Содержание 0088381724142

Отзывы:

Похожие инструкции для 0088381724142

Бренды по названию

Популярные бренды

Makita 0088381724142, Инструкция по эксплуатации

Результаты поиска

Содержание 0088381724142

Отзывы:

Похожие инструкции для 0088381724142

Бренды по названию

Популярные бренды