MyPower VG2000 V4 VoIP Gateway Installation Manual
Page
53 / 72
for the input power.
The following power socket or multi-functional microcomputer
power socket is recommended. The earth line of the power
must be grounded well. Generally, when laying out the cables,
the earth line of the building power supply system is already
buried underground. The user should check whether the
building power is grounded reliably. Otherwise, the user should
do corresponding processing.
The following figure shows the shapes of common power
sockets.
Figure 5-5 Power socket
Connect the power by the following steps:
Step 1: After the MyPower VG2000-48S VoIP gateway power
switch is placed at the OFF location, connect one end of the
power cable to the power input port of the back panel of the
MyPower VG2000-48S VoIP gateway and insert the other end
of the power cable to the power socket (AC power: 220V
50Hz/60Hz).
Step 2: Tune the power switch of the MyPower VG2000-48S
VoIP gateway to the ON location.
Step 3: Check whether the power indicator on the front panel
of the MyPower VG2000-48S VoIP gateway is on. If not, repeat
