MyPower VG2000 V4 VoIP Gateway Installation Manual
Page
26 / 72
hole on the device side and fix the supporting brackets to
the both two sides of the device using screws.
Check whether the cabinet bracket is installed tightly and
horizontally.
Step 3: Install the VG2000-32S VoIP gateway to the cabinet, as
shown in the following diagram.
Figure 3-5 Diagram of installing VG2000-32S VoIP gateway to
the cabinet
The front side of the device faces the handler. Use hands to
stably hold the device and keep the device horizontally.
Carefully place the device on the supporting bracket or
supporting board from the front side of the cabinet. Please
avoid the device and cabinet upright post collision during
placing.
Step 4: Push the device using two hands and keep the
supporting bracket of the device closely attached to the
cabinet upright post surface.
Step 5: Use a fixed screw to install the device on the upright
post of the device.
