Mahlkonig K501, Руководство по эксплуатации

Страница: 14 / 20

|
L A D E N M Ü H L E N S H O P G R I N D E R
2. Pull the key plate with grind adjustment scale (Pos. 4) off the
grinder towards the front. Now the grinder is blocked.
3. Disassemble the spout by pushing it up and pulling it towards you
off the grinder body. (see 9.1)
4. The complete upper part of the disc casing can now be turned to
the left manually and taken off the grinder.
5. In the upper part of the disc casing, unscrew the cover component
to release the disc with the circular spring.
6. Place the new disc making sure the pin of the casing fits into the
gap in the disc. Screw back in the cover.
Make sure all surfaces touching each other are
completely free of coffee or other particles. If the
discs do not lie plane, the grind adjustment will be
misaligned.
Do not screw the cover back in all the way. That
might damage the discs when touching each other
after reassembly. The fine-adjustment is done in
the end (see chapter 9.3).
Seite 13