Mahlkonig K501, Руководство по эксплуатации

Страница: 13 / 20

|
L A D E N M Ü H L E N S H O P G R I N D E R
1. Pull the key plate with grind adjustment scale (Pos. 4) off the
grinder towards the front. Now the grinder blocked.
2. Dismantle the spout by pushing it up and pulling it towards you
off the grinder body.
3. Turn the hopper/grind adjustment knob to fine and with some
more pressure further to the left until the grinder casing cover is
released.
4. Lift off the hopper together with the grinder casing cover.
Make sure that you do not change the position of the movable compo-
nents within the upper part.
5. For cleaning the disc casing use a brush or a vacuum cleaner. Make
sure to remove all foreign objects from the discs.
6. Replace the cover/hopper on the grinder casing and relock it by
turning it to the right until the insert for the spout is facing to the
front.
Make sure all surfaces touching each other are
completely free of coffee or other particles. If the
discs do not lie plane, the grind adjustment will be
misaligned.
7. Reassemble the spout. Push the two pins into the holes of the disc
casing cover and push it against the grinder body. Pull it down into
place. Reinsert the key plate.
9.2 Grinding Disc Replacement
Always remove the electrical plug from the outlet
before conducting cleaning or repair work on the
appliance!
Avoid allowing foreign objects to fall into the grind-
ing gears!
1. Loosen the grind adjustment knob (Pos. 3) with a 8 mm jaw
wrench and pull off the whole hopper to the top.
Seite 12