Mahlkonig K501, Руководство по эксплуатации

Страница: 11 / 20

|
L A D E N M Ü H L E N S H O P G R I N D E R
Defect
Grinder rotates
but without
grinding.
The vibrating
plate rattles.
The keyplate
does not slide in
above the spout.
Cause
Incorrect sense
of rotation.
Foreign particles
hanging
from
the hopper mag-
net are blocking
the input of cof-
fee beans.
The shaker rod is
bent or outworn.
The spout is not
properly mount-
ed.
Remedy
Have the polarity checked by
specialised personnel.
Clean the hopper magnet.
Do not let any object fall into
the grinding discs.
Turn the shaker rod by 180°.
If this does not improve the
noise, exchange the shaker
rod by dismantling the vi-
brating plate and pulling out
the rod.
Grasp the spout from below
and pull it firmly into the cor-
rect position
In case of other malfunctions or continued faults, please contact your
dealer or your authorised customer service centre.
8. Cleaning
Always pull the power supply plug out of the outlet
before carrying out any maintenance or cleaning
work on the device! Observe the safety instructions
under 1.2!
Avoid allowing foreign objects to fall into the grind-
ing gears!
8.1 Cleaning with GRINDZ™ Grinder Cleaner
We recommend cleaning your shop grinder once a month with our
GRINDZ™ Grinder Cleaner.
Simply take the recommended dose of 70 - 80g and drop it into the
empty grinder hopper (2 caps of the jar / 2 sachets).
Adjust the grind setting to coarse and operate as if grinding coffee
beans. Once complete, we recommend passing twice as much coffee
through to purge any residue.
8.2 Cleaning the Hopper
1. Open the lid.
2. Clean the hopper interior and exterior with a damp cloth only. Do
not rinse. For cleaning, only use cleaning agents approved for food
product applications.
3. To dry, rub the hopper with a dry, non-fluffy cloth.
Seite 10