Mahlkonig K501, Руководство по эксплуатации

Страница: 12 / 20

|
L A D E N M Ü H L E N S H O P G R I N D E R
8.3 Cleaning the Grinder Surface Area
1. Pull out the electrical plug!
2. Tip the grinder to the side and clean the placement surface area
and the bottom of the case.
3. Both surfaces must be dry and oil-and-fat-free.
4. Replace the grinder on its base.
8.4 Cleaning the Grinder Housing
1. Clean the housing and shaker externally from time to time with a
cloth.
2. Observe the safety instructions under 1.2!
Be careful of sharp edges when cleaning. The dan-
ger of injury exists!
9. Maintenance and Repair
Always pull the power supply plug out of the outlet
before carrying out any maintenance or cleaning
work on the device!
Check the device regularly for any signs of damage
on the power supply cable, plug, finger protector,
etc. Any repairs that may be required are only al-
lowed to be carried out by authorized experts.
Please contact an authorized customer service cen-
tre or your local dealer.
9.1 Cleaning of the Grinding Gears
Always remove the electrical plug from the outlet
before conducting cleaning or repair work on the
appliance!
Avoid allowing foreign objects to fall into the grind-
ing gears!
Never reach into the rotating grinder discs with the
fingers or other objects!
For cleaning, use only cleaning agents approved for food product ap-
plications.
Seite 11