Mahlkonig K501, Руководство по эксплуатации

Страница: 5 / 20

|
L A D E N M Ü H L E N S H O P G R I N D E R
1. Safety
Please read and observe the following operating
instructions carefully. Non-observance can result in
damage to the device as well as in health-threaten-
ing risks for the user.
1.1 Symbols
The following two symbols are used in this manual of operating in-
structions:
Safety instruction:
In case of non-observance, extreme risk of accidents
exists.
General instruction:
In case of non-observance, the device can become
damaged or optimum operation not be guaranteed.
1.2 Safety Instructions
Never use the grinding mechanism to grind other products or objects
than coffee beans. Ground material is never allowed to be filled into
the hopper.
Do not carry out any modifications or changes on the grinder. In case of
non-observance, the manufacturer shall be liable for resulting damage
in no case whatsoever.
Never operate the grinder in moist or, even worse, in wet surroundings.
Never put your fingers or objects into the rotating grinding mecha-
nism underneath the hopper.
Always pull the power supply plug out of the outlet before carrying
out any maintenance or cleaning work on the device. Never start the
grinder with a defective power supply cable.
Check the grinder regularly for any signs of damage on the power sup-
ply cable, plug, finger protector, etc. Any repairs that may be required
are only allowed to be carried out by experts. Please contact an au-
thorized customer service centre, your local dealer or us directly as the
manufacturer.
Do not exceed the permissible maximum operating period of 40 min-
utes. Afterwards, allow the motor to cool down for approx. 30– 40 min-
utes.
When unpacking the device, please check to determine whether the
power supply voltage (volts) corresponds to the device voltage on the
rating plate.
Children do not recognize the risks that may arise when handling elec-
trical devices; therefore never leave children alone with electrical de-
vices without proper supervision.
Never immerse the grinder in water and do not op-
erate it with wet hands.
Seite 4