MAGUIRE Weigh Scale Blender 4088, Установка, эксплуатация и обслуживание

Страница: 73 / 149

73
System Configuration
Modes of Operation
Setup > System Configuration > Modes of Operation
Modes of Operation - Blender Modes:
•
Blender
– Blending up to 12 components
•
Dispenser
– Operates Blender as a Weigh Scale Dispenser (WSD).
•
Totalizer
– Operates Blender as a Weigh Scale Totalizer (WST).
•
Extrusion (RATE ONLY)
Modes of Operation - Blending Mode Setpoint Configuration.
•
Percent of Natural (default)
– In this mode regrind is a percent of the batch, additives
are a percent of the natural (all naturals combined) and naturals are a ratio to each
other.
•
Percent of Total Batch
– In this mode each component is a percentage of the total
batch. All components must add up to 100%.
See Example of Making Settings on page 27 for information on setting percentages.
Digit Mode - Setpoint resolution.
•
3 Digit (default)
– In this mode regrind and additive settings are in 10ths of a percent
(xx.x). Natural uses 3 digits with no decimal (xxx).
•
4 Digit - In this mode regrind and additive settings are in 100ths of a percent (xx.xx).
Natural uses 4 digits with no decimal (xxxx).
Print Center –
Options to print specific reports to USB including Totals,
Parameters, Alarm History, Alarms and Events, Cycle History, Print All reports.
Setup > System Configuration > Print Center
Print Cycle Options
Setup > System Configuration > Print Cycle Options
Print Cycle Diagnostics
–
When ON this sends a Cycle-by-Cycle printout after each
full dispense cycle to a USB drive inserted into the controller. When ON and with a USB
Flash Drive in the USB port, four lines of information about the dispense cycle that just
occurred will be sent to a file named PRINTER.TXT. The information in this file includes
dispense weight and percentage of each component, the internal rate numbers used by the
computer to determine dispense time, and the actual dispense time of each component.
This is excellent information to track the accuracy of each dispense cycle and the accuracy
of the entire system over an extended period of time. Can be printed as fixed width plain
text file or as a CSV file with or without the column headers (titles).