
64
4. Connections / Configuration
4.1
CONNECTION TO MAGTROL MOTOR TESTING ELECTRONICS
The connection and configuration of the Magtrol DES Power Supply, TSC Torque/Speed Conditioner
and DSP Dynamometer Controller are described in the corresponding User's Manuals for each unit.
These manuals can be found on Magtrol's User Manual CD-ROM (delivered with your dynamometer)
and can also be accessed at Magtrol's Web site:
www.magtrol.com
. Refer to these documents for
additional information on connecting the WB/PB Series Dynamometer to Magtrol motor testing
electronics.
4.1.1
m
AnuAl
t
eSt
c
onFigurAtion
In a manual test configuration
,
all test parameters must be manually entered into the DSP Dynamometer
Controller. Data acquisition is then carried out manually.
Excitation
Torque
TSC 401
Torque-Speed
Conditioner
DES Power Supply
Speed
Eddy-Current (WB)
OR Powder Brake (PB)
Dynamometer
DSP
7001
Dynamometer Controller
Figure 4–1 Manual Test Configuration