Magtrol WB Series Скачать руководство пользователя страница 60 | Manualshive

Страница: 60 / 90

Magtrol WB Series Скачать руководство пользователя страница 60

50

Magtrol WB/PB Dynamometers

Chapter 2 – Installation / Mounting

By slightly moving the dynamometer stator backwards and forwards when the motor is stopped, the
side load disappears. If uncoupling the dynamometer makes the drag torque disappear, either the
coupling will have to be changed or it will have to be realigned with the motor.

C

aution

:

t

he

dynamometer

must

be

unCoupled

prior

to

Calibration

. (r

efer

to

C

hapter

6 – C

alibration

for

more

details

.)

2.7

CONNECTING THE COOLING SYSTEM

Proper cooling of the dynamometer is essential to ensure a long operating life and accurate measuring
results. All Magtrol WB/PB Series Dynamometers* are water-cooled to guaranty the best possible
heat dissipation.

* PB 2.7 Series Dynamometers are available with (K) or without a cooling circuit.

Note:

The cooling tubes must have an inside diameter in accordance with
the indications on the corresponding dynamometer data sheets (

see

Section 1.2

). They must be fitted to the dynamometer using a metal

ring. Also, check for correct water flow direction.

The cooling water input is marked “

C

ooling

water

inlet

” on the dynamometer housing. The other

nipple is used for the water outlet. Check for correct connections.

For more information on the dynamometer's cooling system, refer to

Chapter 3 – Cooling

.

2.8

PROTECTIVE SYSTEMS

WARNING! ALL ROTATING PARTS MUST BE FITTED WITH A

PROTECTIVE SYSTEM TO ENSURE THAT THE USER,
AS WELL AS ALL OTHER SURROUNDING PEOPLE AND
OBJECTS, WILL NOT BE INJURED OR DAMAGED AS
A RESULT OF THE MOTOR UNDER TEST BECOMING
BLOCKED, A TORQUE OVERLOAD, OR ANY OTHER
POTENTIAL PROBLEM.

The following precautions concerning protective equipment of the drive train must be observed:

• Protective elements must prevent access to moving parts (during test).
• Protective elements must cover all parts which can cause crushing or cutting, and protect

against projections of parts having become loose.

• Avoid attaching protective elements to rotating parts.
• Keep protective elements at a sufficient distance away from rotating parts.

«
...
58
59
60
61
62
...
»

Содержание WB Series



























































































Отзывы:

Нет отзывов