
24
Magtrol WB/PB Dynamometers
Chapter 1 – Introduction
WB/PB 65
Due to the continual development of our products, we reserve the right to modify specifications without forewarning.
www.magtrol.com
Magtrol inc
70 Gardenville Parkway
Buffalo, New York 14224 USA
Phone: +1 716 668 5555
Fax: +1 716 668 8705
E-mail: [email protected]
Magtrol sa
Route de Montena, 77
1728 Rossens / Fribourg, Switzerland
Phone: +41 (0)26 407 3000
Fax: +41 (0)26 407 3001
E-mail: [email protected]
Subsidiaries in:
Germany • France
China • India
Worldwide Network
of Sales Agents
Ordering Information
WBPB65-US 05/14
DYnaMoMeter MoDels
sYsteM options anD accessories
DYnaMoMeter options
High Speed (HS)
For testing small/miniature high-speed motors, Magtrol offers
a WB 65 Eddy-Current Dynamometer with speed ranges up
to 50,000 rpm.
Industrial Version (IS)
Single WB and PB Dynamometers are also available in an
industrial version which includes bearing supports, but does
not provide a base plate, or torque and speed measurement.
Vertical Mounting (V)
Vertical Mounting is available on the Eddy-Current (WB)
Dynamometer only. The vertical version has an adapted
bearing fitting and its maximum speed is limited.
Speed Pickup (DG)
All models, including tandems, are equipped with a 60-bit
optical speed sensor. On PB Dynamometers, a 600-bit or
6000-bit speed pickup (encoder) is available as an option for
low speed applications.
orDering inForMation
If one of the listed options is desired, please follow the
dynamometer model (see table above) with a dash and then
the appropriate suffix (as noted in parenthesis). For example,
a Model 1 PB 65 Powder Dynamometer with an optional
6000-bit speed pickup is a 1 PB 65 - DG - 6000.
Example:
1 pB 65 - Dg - 6000
Dynamometer Model
Option
DESCRIPTION
MODEL / PART #
ELECTR
ONICS
High Speed Programmable Dynamometer Controller
DSP7000
Torque-Speed Conditioner (includes necessary cables)
TSC 401/121
Power Supply (includes necessary cables)
DES 411/111
High Speed Single-Phase Power Analyzer
6510
e
High Speed Three-Phase Power Analyzer
6530
SOFT
-
W
ARE
M-TEST 7 Motor Testing Software
M-TEST 7
Temperature Testing Hardware
HW-TTEST
MISC
Dynamometer Table (with grooved table top)
005450
Transformer (24 VDC) for electromagnetic clutch of tandem dynamometers
234-311-920-011
Couplings, Thermostatic Sluice, Pressure Sensitive Switch
On Request
Water Cooling System for Brake
On Request
Calibration Weights
On Request
Eddy-Current
Powder
Tandem
1 WB 65
1 PB 65
2 WB 65 + EK + 1 PB 65
2 WB 65
2 PB 65
2 WB 65 + EK + 2 PB 65
Mechanical Rotor Blocking Device (MB)
A mechanical rotor blocking device, which allows locked rotor
testing, is available for the WB Dynamometer.