©
2017 Sensata Technologies
Page 49
Appendix A – Speci
fi
cations and Optional Equipment
Table A-1, MS-PAE Speci
fi
cations (
at 25°C
)
Appendix A – Speci
fi
cations and Optional Equipment
Models
MS4024PAE
MS4448PAE
Inverter Speci
fi
cations
Input battery voltage range
18.0 to 34.0 VDC
36.0 to 64.0 VDC
Absolute maximum DC input
50 VDC
68 VDC
Nominal AC output voltage
120/240 VAC split phase
AC output voltage accuracy
L-N: 120 VAC ±5%, L-L: 240 VAC ±5% (
≤
continuous power)
Output frequency and accuracy
60 Hz ± 0.1 Hz
Total Harmonic Distortion (THD)
< 5%
Continuous power output at 25°C
4000 VA (L-L)
4400 VA (L-L)
Continuous AC output current
L-N: 27.0 A/120 VAC, L-L: 16.7 A/240 VAC
L-N: 29.7 A/120 VAC, L-L: 18.3 A/240 VAC
1 msec surge current (AAC)
L-N: 120, L-L 70
100 msec surge current (AAC)
L-N: 72, L-L 40
L-N: 75, L-L 40
5 sec surge power (real watts)
5800
8500
30 sec surge power (real watts)
5200
6000
5 min surge power (real watts)
4800
5400
30 min surge power (real watts)
4500
4800
Max. continuous input current
266A
144A
Inverter ef
fi
ciency (peak)
93%
94%
Transfer time
16 mSecs
Search mode (typical)
< 6 watts
No load (120 VAC output, typical)
27 watts
25 watts
Waveform
Pure Sine Wave
Charger Speci
fi
cations
AC input range
60 to 140 VAC / 50 to 70 Hz
Continuous output at 25°C
105 ADC
60 ADC
Charger ef
fi
ciency
85%
Power factor
> 0.95
Input current at rated output
15 AAC/leg at 120/240 VAC split phase
17.5 AAC/leg at 120/240 VAC split phase
General Features and Capabilities
Transfer relay capability
2 legs at 30A per leg transfer standard
Five-stage charging capability
Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™
Battery temp compensation
Yes, 15 ft Battery temp sensor standard
Internal cooling
0 to 120 cfm variable speed drive using dual 92 mm brushless DC fans
Overcurrent protection
Yes, with two overlapping circuits
Over-temperature protection
Yes on transformers, MOSFETS, and battery
Corrosive protection
PCBs conformal coated, powder-coated chassis & top, stainless steel fasteners
Listings
ETL Listed to ANSI/UL1741, 1st edition, and CSA STD C22.2 No. 107.1-01
Warranty (Parts & Labor)
3 yrs parts and labor (extends to 5 yrs when purchased with and installed on MP/MMP system)
Environmental Speci
fi
cations
Operating temperature
–20°C to +60°C (-4°F to 140°F)
Non-operating temperature
–40°C to +70°C (-40°F to 158°F)
Operating humidity
0 to 95% RH non-condensing
Physical Speci
fi
cations
Unit Dimensions (L x W x H)
13.75” x 12.65” x 8.0” (34.9 cm x 32.1 cm x 20.3 cm)
Shipping dimensions (L x W x H)
18.5” x 17.5” x 12.5” (47 cm x 44.5 cm x 31.8 cm)
Mounting
Shelf, wall (no vents on bottom), MP or MMP panels
Unit/Shipping weight
55 lb (24.9 kg) / 62 lb (28.2 kg)
55 lb (24.9 kg) / 63 lb (29.6 kg)
