© 2017 Sensata Technologies
12
Installation
Figure 2-4, MMS1012 Model Dimensions
Mounting holes x4
[¼” (0.25") diameter]
10.0"
~ 16 "
(16.59")
~ 6 " (6.71")
~ 8 " (8.41")
~ 7 " (7.51")
3
4
7
16
1
2
5
8
~ 4 "
(4.625")
5
8
2.1.3 Wiring Guidelines
• Before connecting any wires, determine all wire routes to and
from the inverter throughout the home/of
fi
ce, recreational
vehicle, or boat.
• Conductors passing through walls or other structural members
must be protected to minimize insulation damage such as cha
fi
ng,
which can be caused by vibration or constant rubbing.
• Always check for existing electrical, plumbing, or other areas of
potential damage prior to cutting into structural surfaces or walls.
• Make sure all wires have a smooth bend radius and do not
become kinked.
• Both AC and DC overcurrent protection must be provided as part
of the installation.
• Ensure all conductor insulation is of a type that is approved for
the voltage, operation, temperature, and location of use.
