Magnum Energy MM 1212AE Скачать руководство пользователя

Страница: 36 / 44

2006 Magnum Energy Inc

Appendix A - Remote Control and Monitoring

Appendix A - Remote Control and Monitoring

There are several remotes that let you monitor and switch the inverter

on/off from a convenient location. Using the supplied cable with RJ11

connectors, they connect easily to the REMOTE port located on the

front side of the MM Series (see figure 3, item 10).
Depending on your inverter model, you can select one of the following

remotes:
MM-R - Provides three LED indicators for inverter status and includes a

remote ON/OFF switch; comes with 25’ cable. This remote is for MM

Series inverters without the battery charger feature; such as the

MM612 (requires serial number L1-201 or higher) or MM612G models.
MM-RC - Provides six LED indicators for inverter and charger status,

includes a remote ON/OFF switch; comes with 25’ cable. This remote is

for MM Series inverters with the battery charger feature; such as the

MM612AE, MM1212 or MM1212AE models.
ME-RC50 - Full feature remote with backlit LCD display and LED

indicators for inverter and charger status. Provides full menu access for

easy selection and adjustment; comes with 50’ cable. The ME-RC50 is

used for many inverter models and has additional features that are not

functional with the MM Series inverter. Can be used with all MM Series

inverter models (MM612 requires serial number L1-201 or higher).

Using the MM Remotes

The

MM remotes

performs the same function as the ON/OFF switch on

the

front of the MM Series inverter and

provides status of the different

operational modes of the inverter. The appropriate remote to use,

depends on whether your inverter includes the battery charger feature.

For MM Series inverters that do not have the battery charger, the MM-R

is the recommended remote; for MM Series inverters that do have the

battery charger, the MM-RC is the recommended remote.

Figure 13, MM Remotes

MM-R

MM-RC

BULK

ABSORB

FAULT

FLOAT

AC IN

INVERT

ON/OFF

INVERT

AC IN

FAULT

ON/OFF

3 LED’S for

inverter operation

3 additional LED’S

for charger operation

http://www.wholesalesolar.com/inverters.html

Содержание MM 1212AE













































Результаты поиска

Содержание MM 1212AE

Отзывы:

Похожие инструкции для MM 1212AE

Бренды по названию

Популярные бренды

Magnum Energy MM 1212AE, Инструкция по установке и эксплуатации

Результаты поиска

Содержание MM 1212AE

Отзывы:

Похожие инструкции для MM 1212AE

Бренды по названию

Популярные бренды