10
58-640 PULSAR Model R96 Pulse Burst Radar Transmitter - F
OUNDATION
fieldbus
™
Instruction Manual
FEATURES
: A list of the features available in the transmit-
ter, such as Reports and Soft Write Lock.
FEATURES_SEL
: Allows the user to turn Features on or
off.
CYCLE_TYPE
: Identifies the block execution methods that
are available.
CYCLE_SEL
: Allows the user to select the block execution
method.
MIN_CYCLE_T
: The time duration of the shortest cycle
interval. It puts a lower limit on the scheduling of the
resource.
MEMORY_SIZE
: Available configuration memory in the
empty resource.
NV_CYCLE_T
: The minimum time interval between
copies of non-volatile (NV) parameters to NV memory. NV
memory is only updated if there has been a significant
change in the dynamic value and the last value saved will be
available for the restart procedure.
NOTE: After completing a download, allow several seconds before
removing power from the PULSAR Model R96 FF transmitter to
ensure that all data has been saved.
FREE_SPACE
: Shows the amount of available memory for
further configuration. The value is zero percent in a precon-
figured device.
FREE_TIME
: The amount of the block processing time
that is free to process additional blocks.
SHED_RCAS
: The time duration at which to give up com-
puter writes to function block RCas locations.
SHED_ROUT
: The time duration at which to give up
computer writes to function block ROut locations.
FAULT_STATE, SET_FSTATE, CLR_FSTATE
: These
only apply to output function blocks. (The Model R96 FF
has no output function blocks).
MAX_NOTIFY
: The maximum number of alert reports
that the transmitter can send without getting a confirma-
tion.
LIM_NOTIFY
: the maximum numbers of unconfirmed
alert notify messages allowed. No alerts are reported if set to
zero.
CONFIRM_TIME
: the time that the transmitter will wait
for confirmation of receipt of a report before trying again.
Retry will not occur if CONFIRM_TIME = 0.
