IMPULSE®•G+/VG+ Series 4 Profinet Installation Manual - August 2014
52
Configuration Tab
The Configuration tab sets web page behavior parameters. Access is restricted unless a valid
password is entered.
Figure 19: Configuration Tab View
Security Login
Enter a valid password and click “Log in”. The button text will change to “Log out” and the status will
change to “Logged in”.
NOTE:
The default security password is “yaskawa”.
This password can be changed in the “Change Password” section of the tab. Entering a valid
password allows access to the settings in the Configuration tab, Email Alerts tab, and the Parameter
Access tab.
Change Password
To change the password, enter the new password in the “New Password:” and “Confirm Password:”
text boxes, and then click “Change password”. The Status display will change to “Idle,” then
“Changing Password,” and then “Password Changed”. If the passwords in the two text boxes do not
match, the Status will display “Passwords don’t match”.
Option Card
The values displayed in the various tabs are refreshed at the rate defined in the “Applet Refresh
Rate (ms)” text box. Enter values in the range of 1000 ms to 65535 ms (65.535 seconds).
Parameter Security can be enabled or disabled by clicking one of the radio buttons. When “Disabled”
is selected, no password is necessary and all functions in the web pages will be available. When
“Enabled” is selected, a valid password must be entered to edit email settings and to write
parameters.