Magnetek Flex 4Base, Инструкция по эксплуатации

Страница: 21 / 41

Flex 4Base® CE Instruction Manual
January 2017
Page 21 of 41
4.1.8.2 A/B Pushbutton Select with LED Indication – Standard Right/Left
Pushbutton Configuration
There are four different types of A/B selector sequences available. Choose one that is most
suitable for your application. Refer to Section 6.1: Output Relay Contact Diagrams.
Type-A selector sequence: A → B
Type-B selector sequence: Off → A → B
Type-C selector sequence: A → B → A+B
Type-D selector sequence: Off → A → B → A+B
Function
Number
Display Type PB1 PB2 PB3 PB4
25
2 5 Reds Normal Normal A/1&2 Normal
26
2 6 Reds Normal Normal B/1&2 Normal
27
2 7 Reds Normal Normal C/1&2 Normal
28
2 8 Reds Normal Normal D/1&2 Normal
29 2 9 Reds Normal Normal Normal A/1&2
30
3 Greens Normal Normal Normal B/1&2
31
3 1 Reds Normal Normal Normal C/1&2
32
3 2 Reds Normal Normal Normal D/1&2
* PB1…PB4 → Pushbutton number.
* Normal → Normal momentary contact.
* A/1&2 ~ D/1&2 → A/B pushbutton select function with designated LED indication.
4.1.8.3 Toggled Pushbutton with LED Indication – Inline Top/Bottom
Pushbutton Configuration
Set pushbutton toggled function (latching output relay) with LED
indications. LED A and LED B shown inside the shaded box illustrates
which LED on the transmitter lights up when the designated pushbutton
is pressed. Refer to Section 4.2.4: Jumper Settings
Error! Reference
source not found. .
Function
Number
Display Type PB1 PB2 PB3 PB4
1
1 Red LED A Normal Normal Normal
3
3 Reds Normal LED B Normal Normal
2
2 Reds Normal Normal LED A Normal
4
4 Reds Normal Normal Normal LED B
19
1 Green + 9 Reds LED A LED B Normal Normal
22 2 2 Reds Normal Normal LED A LED B
* PB1…PB4 → Pushbutton number.
* Normal → Normal momentary contact.
* LED A & LED B → Pushbutton toggled function with designated LED indication.