Flex 4Base® CE Instruction Manual
January 2017
Page 20 of 41
4.1.7 Infrared Programming
Other custom functions and settings not listed in this manual can be
programmed via the infrared IR programmer unit, such as the system
serial number, frequency range, new and updated functions, plus many
others. Please contact a Magnetek representative for more details.
4.1.8 Pushbutton Function Settings
1. Press down the STOP button (transmitter power off).
2. Press and hold PB3 and PB4 at the same time.
3. Reset the STOP button by rotating it clockwise or counter-clockwise;
it will pop up (transmitter power on).
4. Release PB3 and PB4 at the same time (entered Pushbutton Function mode).
5. The Status LED displays current pushbutton function setting with orange, green and red blinks.
An orange blink represents the hundreds (+
1
00), a green blink represents the tens (+0
1
0), and
a red blink represents the units (+00
1
). For example,
one
orange blink followed by
two
green
blinks and
five
red blinks is pushbutton function number
1
2
5
. Pushbutton function number with
“0” is represented by no orange, green or red blink. For example,
one
orange blink followed by
five
red blinks is pushbutton function number
1
0
5
.
6. Set the pushbutton function number by pressing PB3 to increment the hundreds (+
1
00), PB2 to
increment the tens (+0
1
0), PB1 to increment the units (+00
1
), and PB4 to reset (000 - constant
orange). For example, pressing PB3 one time, PB2 four times, and PB1 six times is pushbutton
function number
1
4
6
(Status LED blinks
1
orange,
4
greens and
6
reds).
7. Exit Pushbutton Function mode by pressing down the STOP button (transmitter power off).
4.1.8.1 Toggled Pushbutton with LED Indication – Standard Right/Left
Pushbutton Configuration
Set pushbutton toggled function (latching output relay) with LED indications. LED A and LED
B, shown inside the shaded box, illustrates which LED on the transmitter lights up when the
designated pushbutton is pressed.
Function
Number
Display
Type
PB1 PB2 PB3 PB4
1
1 Red
LED
A Normal Normal Normal
2
2 Reds
Normal
LED B
Normal
Normal
3
3 Reds
Normal
Normal
LED A
Normal
4
4
Reds
Normal Normal Normal LED B
13
1 Green + 3 Reds
LED A
LED B
Normal
Normal
14
1 Green + 4 Reds
Normal
Normal
LED A
LED B
* PB1…PB4
→
Pushbutton number.
* Normal
→
Normal momentary contact.
* A/1&2 ~ D/1&2
→
A/B pushbutton select function with designated LED indication.
