Flex 4Base® CE Instruction Manual
January 2017
Page 18 of 41
4.1.3.2 Receiver-to-Transmitter Pairing
1. Obtain the new transmitter.
2. Press down the STOP button (transmitter power off).
3. Press and hold PB1 and PB3 at the same time.
4. Reset the STOP button by rotating it clockwise or counter-clockwise; it will pop up
(transmitter power on) – after a brief pause, let go of PB1 and PB3.
5. Now the new transmitter is in Remote Pairing mode.
6. Ensure power is applied to the receiver.
7. Press and hold both the PAIRING button located on the receiver cover and hold PB3 on
the new transmitter at the same time. When the transmitter Status LED turns to constant
green while both pushbuttons are still pressed down, the pairing is completed.
8. Exit Remote Pairing mode by pressing down the STOP button (transmitter power off).
NOTE: Make sure the pairing process is executed within distance of 10 meters from one
another and no other active receivers nearby. During the pairing process, the
receiver MAIN relays must be deactivated (relay open).
