MAGNEPLANAR MMC 2, Руководство по установке

Страница: 3 / 23

B Painting Speaker Frames
Many customers will want to paint the top and bottom molding to match their
decor.
Th e top and bottom frames can be ordered with a primer coat. We
recommend Krylon spray can paint.
a. Mask o ff hardware in the speaker frames to prevent paint from fouling
mechanical parts. Using a very fi ne steel wool or sandpaper, lightly sand
the primer surface to remove any possible contaminants from oily fi ngers,
etc.
b. Spray 4 or 5 light coats, allowing drying time to prevent runs in the paint
and for a smooth fi nish. Sand with fi ne 600 sandpaper between coats for
an extra-smooth fi nish.
c. Spray a coat of Krylon clear coat (gloss or satin) to protect the fi nish.
d. Install the speaker trim in the edge of the speaker with a rubber mallet.
(Masking tape over the trim will help prevent marring of the fi nish from
the rubber mallet.)
e. Install 3/4 inch, 18 gauge brads in the speaker trim to secure the trim.
Revision-- 7-25-15 Page of 3 23