MAGNEPLANAR MMC 2, Руководство по установке

Страница: 16 / 23

J
Speaker Angle Adjustment
Some of the adjustments below are easier if the motor is pulled back using a
strip of duct tape as described above in Final Speaker Installation (or with the
help of an assistant).
For the best sound, the MMC 2 should be angled so that the panel is on-axis
with the listener with a minimum distance from the wall of 30 degrees. (Use of
the MMC 2 as a dual center channel speaker requires slightly di
ff erent
adjustments. Contact Magnepan for dual center speaker installations).
Th is adjustment can be challenging on your fi rst attempt. Th e fi gure, below,
shows the concept of the Cam/Stop. It is not an actual drawing of the parts,
but, the visualization of the design may be helpful to make the adjustment.
CAUTION-- Before you begin the adjustment, take the precaution of securing
the top frame. It will be necessary to li
ft up on the speaker frame as you make
this adjustment. Th is could result in the top frame coming loose from the wall
and falling. Painter's tape can help to prevent the top frame from being pushed
upward during the speaker angle adjustment(or an assistant can secure the top
frame).
Fig. 11
Revision-- 7-25-15 Page of 16 23