MAGNEPLANAR MMC 2, Руководство по установке

Страница: 18 / 23

Setting stop in closed position-- A nylon screw is included with the MMC 2 to
act as a stop so that the MMC 2 can be adjusted to be parallel with the wall in
the closed position.
Th e screw hole is located at the bottom inside edge of the
MMC 2--3/4 inch from the bottom and 1 1/8 inch from the outside edge. To
ensure that the nylon screw will not loosen, wrap Te
fl on plumber's tape on the
threads or a drop of blue Loctite or score the threads lengthwise.
Fig. 11
Revision-- 7-25-15 Page of 18 23