s-AKESURETHE3EALING"AR THE
Airtight Gasket
(7) and
Sealing Gasket
(9) are
not dirty.
s4HE
MAGIC VAC
®
bag may be punctured. To check, seal the bag with air inside,
place it under water and squeeze. If you see bubbles, there is a leak. Reseal or
use another bag.
MAGIC VAC
®
does not
correctly seal the bag
s
When you can’t completely seal the bag, press the
“sealing mode”
button
(2M)
and increase the sealing time.
s)FTHE
Sealing Bar
(6) overheats and melts the bag, lift the
Cover
(5) and allow the
Sealing Bar
(6) to cool for a few minutes.
s#HECKTHEPOSITIONANDINTEGRITYOFTHE
Sealing Gasket
(9)
s)FLIQUIDSESCAPEDURINGTHEVACUUMPACKINGPHASEREMEMBERTHATTHEYMUSTFIRST
be refrigerated.
The MAGIC VAC
®
bag
doesn't maintain its
vacuum after sealing
s,EAKSALONGTHESEALCANBECAUSEDBYWRINKLESCRUMBSGREASEORLIQUIDS/PEN
the bag, clean the upper part of the inside of the bag and remove any residue from
the
Sealing Bar
(6) before resealing.
s-AKESURETHEBAGISNOTPUNCTUREDANDTHUSDIDNOTMAINTAINTHEVACUUM0ROTECT
any pointed edges of the contents in the bag using paper napkins.
MAGIC VAC
®
does not
seal containers.
s 5SING THE
Canister Tube
(16), connect the canister lid (or the Lid Attachment if
necessary) and the
ACCESSORY PORT
(4) on the machine.
s,EAVEADEQUATESPACEATLEASTCM BETWEENTHECONTENTSANDTHETOPOFTHEJAR
or canister.
s-AKESURETHATTHERIMOFTHEJARORCANISTERANDUNIVERSALLIDARENOTDAMAGEDIN
the sealing zone. Clean the rim and the lid with a damp cloth and reseal.
s-AKESURETHEGASKETONTHECANISTERLIDORUNIVERSALLIDISPLACEDINTHECORRECT
position and not damaged.
MAGIC VAC
®
Executive
canisters or Universal
MAGIC VAC
®
Lids do
not maintain the seal
s-AKESURETHEKNOBONTHECANISTERLIDISSETTO
“VACUUM”
before vacuum-packing
and that it is set to
“CLOSED”
after it is complete.
s#HECKTHATTHE
O-Ring
under the knob on the canister lid or universal lid is correctly
positioned.
s-AKESSURETHATTHERIMOFTHEJARORCANISTERANDUNIVERSALLIDARENOTDAMAGEDIN
the sealing zone. Clean the rim and the lid with a damp cloth and reseal.
s-AKESURETHEGASKETONTHECANISTERLIDORUNIVERSALLIDISPLACEDINTHECORRECT
position and not damaged.
s-AKESURETHECONNECTIONTUBEISCORRECTLYCONNECTEDTOBOTHTHECANISTERKNOBAS
well as the
ACCESSORY PORT
(4) on the machine.
The marinating cycle
does not start correctly
s-AKESURETHEKNOBONTHELIDOFTHE3QUARE
MAGIC VAC
®
Executive
Canister
(cod.
ACO1073)
is set to
“OPEN - (M)”
and that the Handles (1) are attached.
s#HECKTHATTHE
O-Ring
under the knob on the canister lid or universal lid is correctly
positioned.
s-AKESSURETHATTHERIMOFTHEJARORCANISTERANDUNIVERSALLIDARENOTDAMAGEDIN
the sealing zone. Clean the rim and the lid with a damp cloth and reseal.
s-AKESURETHECONNECTIONTUBEISCORRECTLYCONNECTEDTOBOTHTHECANISTERKNOBAS
well as the
ACCESSORY PORT
(4) on the machine.
s-AKESURETHEGASKETONTHECANISTERLIDORUNIVERSALLIDISPLACEDINTHECORRECT
position and not damaged.
s ,IGHTLY PRESS THE CANISTER LID DOWN WHEN THE FIRST VACUUM PHASE STARTS UNTIL THE
lights on the
Progress Display
(2C) are regularly lit.
40
Содержание Maxima 2
Страница 140: ...s 2 5 s 4 s 4 3 139...
Страница 141: ...s 2 5 s 4 s 4 3 140...