S
How To Go From One Function Set To Another
Your Mag Charger® LED flashlight’s “standard” setting is
Function Set #1.
If you
want to keep that setting you don’t have to do anything.
Function Set #1
will
always be in effect unless it is changed. If you want to choose a different
function set, follow these steps:
1. Unscrew the tail cap, backing it out of the barrel far enough that the flashlight
will not turn on. (Note: This may require the tailcap to be removed from the
barrel entirely).
2. Pause for 2 seconds.
3. Press the switch button
and
keep holding it down.
4.
While still holding down the
switch button
,
screw the tail
cap back in until it is tight.
5.
Keep holding down the
switch button.
Within about
4 seconds the flashlight
will start to blink.
6. The number of blinks indicates the new selected Function Set.
7. To choose a new Function Set, release the switch button after the
corresponding number of blinks (releasing after 1 blink chooses
Function Set #1
;
releasing after 2 blinks chooses
Function Set #2
;
release after 3 blinks for
Function
Set #3
,
and release after 4 blinks to choose
Function Set #4.)
Your choice of a
Function Set remains in effect until you change it by repeating the above
process. (See our Demo video at www.maglite.com)
몇
NOTICE:
To avoid deeply discharging the rechargeable NiMH battery,
always turn the flashlight off when the flashlight beam starts to dim. A dim
beam is an indication that the battery needs to be recharged.
Spot-to-Flood Beam
The quick focusing spot-to-flood beam operates with a simple quarter turn
of the flashlight head assembly.
Frequently Asked Questions
Q. How long can I leave the flashlight in the Charging Cradle (on
charge) without using?
A. Indefinitely.
Q. If dust occurs inside my reflector, how do I clean it without damage
to the reflector?
A. Do not touch reflector. Use a camel hair brush lightly or blow with a
compressed air duster as used on computers and electronics. Use the same
care that you would give a precision camera lens.
Q. How do I get a fingerprint off my reflector?
A. Use a camera lens cleaner and a lint-free cloth.
11
Section 5
Operation -
Getting the most out of Your Mag Charger
®
LED Rechargeable Flashlight System
421_493_Rech_Man_LED_WHS_0320.qxp_Layout 1 4/5/21 9:35 AM Page 12
