6 / 33
Intended use
JUPITER X is an equipment allowing:
• Pre-identification of de-energized cables in excavations, gutters and
cable trays, with short-circuited ends.
• Identification of dead conductors and continuity test to the transmitter
called S1.
shorted end (closed circuit)
open circuit end
The device/system described in this documentation should only be
operated by qualified personnel for each specific task. The
documentation relating to this task must be observed, in particular the
safety instructions and warnings. Qualified persons are, due to their
training and experience, able to recognize the risks associated with the
handling of this product / system and to avoid them.
JUPITER X is intended for personnel authorized to work on electrical
networks.
The documentation relating to each function must be observed, in
particular the safety instructions and warnings. Qualified persons are,
due to their training and experience, able to recognize the risks
associated with the handling of this product and to avoid them.
All safety instructions imposed by the network operating company must
be scrupulously respected.
The user of the material must have been trained in the handling of the
material.
Its use is exclusively reserved for de-energized networks.
The cable to be identified must be consigned by an authorized agent
and the 2 ends must be short-circuited and earthed.
A verification of the absence of voltage (VAT) must imperatively be
carried out before use.
Wearing personal protective equipment (PPE) is mandatory (class 00 or
higher electrical insulating gloves, helmet with protective face shield)
The material should not be used when at least one of its
constituent parts is damaged.
