23 / 33
The cable being cut, probe any 2 cores of the 3.
Press the « measurement » button, the « end of
measurement » LED turns off.
Wait for the result (3 seconds), the « end of measurement »
LED turns on.
The result will depend on the probed cores and on the cable
extremity they are connected to :
If the probe is connected towards S1, the LED “YES” for
the S1 continuity turns on.
If the phase is identified, the
L1
,
L2
or
L3
LED
illuminates.
Repeat the operation to identify the other cores.
The receiver designates the free conductor
.
Do not
exceed the
protective
stop
