MACROMEDIA Director MX, Руководство пользователя

Страница: 238 / 624

Chapter 7 238
Setting PICT cast member properties
You use PICT cast member properties to change the names of PICT cast members and set their
properties.
To view or change PICT cast member properties:
1
Select a PICT cast member, and open the Property inspector in Graphical view.
2
To view or edit the cast member name, use the Name field text box on the Member tab.
3
To specify how Director removes the cast member from memory if memory is low, select an
option from the Unload pop-up menu. See “Controlling cast member unloading”
on page 152.
Setting Paint window preferences
You can use Paint window preferences to modify the settings of several tools and drawing
methods in the Paint window.
To change Paint window preferences:
1
Select Edit > Preferences > Paint.
2
To make tools remember the last color or ink used, select the following options:
Remember Color
remembers the last color used with a tool, which remains selected for the next
time you use the Brush or Airbrush tools.
Remember Ink
remembers the last ink used with a tool, which remains selected for the next
time you use any tool.
3
To control the way colors cycle when you draw with Cycle ink, select one of the following
options:
Repeat Sequence
causes colors to cycle from the foreground color to the destination color and
then repeat from foreground to destination.
Reverse Sequence
causes colors to cycle from the foreground color to the destination color
and then from destination to foreground.
4
To set a line width that is thicker than the widths available in the Paint window, use the Other
Line Width slider to enter a value.
The width you set is the width that appears when you draw a line after selecting Other
Line Width.
5
To set the opacity of a color when using the Blend ink effect in the Paint window, use the
Blend slider to enter a value.
You can vary the blend value between 0 and 100%.
6
To set the rate at which artwork changes when you use the Darken or Lighten effects in the
Paint window, use the Lighten or Darken slider to enter a value.