MacDon R1 Series, Руководство оператора

Страница: 157 / 346

215333
141
Revision A
Removing Cutterbar Door Curtains
The procedure for removing cutterbar door curtains is the same for both doors.
1003631
Figure 4.21: R1 Series Rotary Disc Pull-Type
1. Open cutterbar doors. For instructions, refer to 3.3.1
Opening Cutterbar Doors
–
North America, page 36 or 3.3.2
Opening Cutterbar Doors
–
Export Latches, page 37 .
1022628
B
C
A
A A
Figure 4.22: Cutterbar Door
2. Remove seven nuts (A) from the bolt studs.
3. Remove aluminum liner (B).
4. Remove curtain (C).
Installing Cutterbar Door Curtains
The procedure for installing cutterbar door curtains is the same for both doors.
1022626
B
A
C
D
E
Figure 4.23: Cutterbar Curtain
1. Insert seven cutterbar door stud bolts (B) into the precut
holes on curtain (A).
2. Install seven large washers (C).
3. Install liner panel (D) against washers.
4. Install seven nuts (E) onto bolt studs and torque to 28 Nm
(21 lbf·ft).
IMPORTANT:
To avoid damaging bolt studs, do NOT overtighten the nuts.
5. Close cutterbar doors. For instructions, refer to 3.3.3
Closing Cutterbar Doors, page 38 .
MAINTENANCE AND SERVICING