MacDon M205, Руководство оператора

Страница: 189 / 514

214603
169
Revision A
Cab Display Module (CDM) Voltage Display
The electrical system voltage is displayed on the cab display module (CDM) when selected with the SELECT
button on the ground speed lever (GSL) handle or the SELECT switch on the CDM. The display indicates the
condition of the battery and alternator.
Ignition Engine Reading Indicated Condition
ON
Running
13.8
–
15.0 Normal
> 16.0 17 Regulator out of adjustment
< 12.5 17 Alternator not working or regulator out of adjustment
Shut down 12.0 Battery normal
Engine Warning Lights
There are four engine warning lights that illuminate if abnormal conditions occur while the engine is running. The
engine warning lights should
NOT be illuminated under normal operating conditions. For more information, refer to
Engine Warning Lights, page 86 .
4.3.6 Driving the Windrower
Review the following list of dangers, warnings, and cautions before operating the windrower for the first time, or
when training new operators.
DANGER
•
NEVER move the ground speed lever or steering wheel until you are sure all bystanders have cleared
the area.
•
Make sure area is clear before making turns, as the ends of a header travel in a large arc.
•
Check the operation of all controls in a safe, clear area before starting work.
•
Understand the capacity and operating characteristics of your machine.
•
Do NOT allow riders in or on the machine.
•
Do NOT operate unless seated in the operator's position.
•
Do NOT attempt to get on or off a moving windrower.
•
AVOID sudden starts and stops.
•
AVOID inclines, ditches, and fences.
•
Do NOT rapidly accelerate or decelerate when turning.
•
REDUCE your speed before turning, crossing slopes, or travelling over rough ground.
•
Do NOT allow anyone to stand behind the machine while operating. Foreign objects may be forcibly
ejected.
OPERATION
17. Display flashes voltage reading with single loud tone. Repeats every 30 minutes until condition is fixed.