MacDon M155, Инструкции по разгрузке и сборке

Страница: 86 / 272

215015
60
Revision A
3.11 Installing Exhaust Stack
1006032
A
B
Figure 3.64: Exhaust Stack
1. Open the engine compartment hood.
2. Retrieve exhaust stack (A) and clamp (B) (unpacked in 2.6
Removing Hand Rails and Exhaust Stack, page 25 ).
3. Loosen clamp (B) on exhaust stack (A).
1006033
A
B
Figure 3.65: Muffler
4. Remove the covering from muffler (A), and loosen
clamp (B) on the muffler.
1006034
A
B
C
Figure 3.66: Exhaust Shroud
5. Position stack (A) into the slot in exhaust shroud (B), and
connect the stack to the muffler.
NOTE:
If shroud (B) interferes with stack (A), loosen wing nut (C)
on the shroud and move the shroud so the stack can be
installed.
ASSEMBLING THE WINDROWER