MacDon M155, Инструкции по разгрузке и сборке

Страница: 118 / 272

215015
92
Revision A
1009134
CXXX
MXXX
DISPLAY LANGUAGE?
ENGLISH
D
C
A
B
Figure 4.4: Language Display
4. Press right arrow (C) to select YES. Press SELECT (D).
•
DISPLAY LANGUAGE? is displayed on the upper line.
•
Default language is displayed on the lower line.
5. Press left arrow (B) or right arrow (C) to select preferred
language.
NOTE:
Language options that may be available are English,
Russian, and Spanish.
6. Press PROGRAM (A) to exit programming mode or press
SELECT (D) to proceed to next CAB DISPLAY SETUP? action.
4.2.2 Changing the Windrower Display Units
1009099
CXXX
MXXX
WINDROWER SETUP?
NO/YES
A
B
Figure 4.5: CDM Programming Buttons
1. Turn ignition key to RUN, or start the engine.
2. Press PROGRAM (A) and SELECT (B) on cab display module
(CDM) to enter programming mode.
•
WINDROWER SETUP? is displayed on the upper line.
•
NO/YES is displayed on the lower line.
1009131
CXXX
MXXX
CAB DISPLAY SETUP?
NO/YES
B
A
Figure 4.6: Cab Display Setup
3. Press SELECT (B) until CAB DISPLAY SETUP? is displayed on
the upper line.
•
NO/YES is displayed on the lower line.
4. Press right arrow (A) to select YES. Press SELECT (B).
•
DISPLAY LANGUAGE? is displayed on the upper line.
CAB DISPLAY MODULE