MacDon M155, Инструкции по разгрузке и сборке

Страница: 216 / 272

215015
190
Revision A
1029714
A
B
Figure 6.47: Header Float Linkage
IMPORTANT:
To prevent damage to the lift system when lowering header
lift linkages without a header or weight box attached to the
windrower, ensure the float engagement pin is installed in
storage position (B) and
NOT in engaged position (A).
1008925
A
Figure 6.48: Ground Speed Lever
CAUTION
Check to be sure all bystanders have cleared the area.
IMPORTANT:
Before starting engine, remove protective cover from
exhaust stack.
3. Start the engine and activate HEADER DOWN button (A) on
the ground speed lever (GSL) to fully retract header lift
cylinders.
1008942
A
Figure 6.49: Ground Speed Lever
4. Press REEL UP switch (A) on the GSL to raise the center-link
until the hook is above the attachment pin on the header.
IMPORTANT:
If the center-link is too low, it may contact the header as
the windrower approaches the header for hookup.
ATTACHING HEADERS