MacDon M155, Инструкции по разгрузке и сборке

Страница: 136 / 272

215015
110
Revision A
4.3.14 Setting the Windrower
’
s Tire Size
1009066
CXXX
MXXX
WINDROWER SETUP?
NO/YES
A
B
C
Figure 4.45: CDM Programming Buttons
1. Turn ignition key to RUN, or start the engine.
2. Press PROGRAM (A) and SELECT (C) on the cab display
module (CDM) to enter programming mode.
•
WINDROWER SETUP? is displayed on the upper line.
•
NO/YES is displayed on the lower line.
3. Press right arrow (B) to select YES. Press SELECT (C).
•
SET KNIFE SPEED? is displayed on the upper line.
1009108
CXXX
MXXX
SET TIRE SIZE?
18.4 X 26 TURF
D
C
B
A
Figure 4.46: Tire Size
4. Press SELECT (D) until SET TIRE SIZE? is displayed on the
upper line.
•
Currently installed tire size is displayed on the
lower line.
NOTE:
The following tire sizes are available:
•
18.4 x 26 TURF
•
18.4 x 26 BAR
•
23.1 x 26 TURF
•
600
–
65 R28
5. Press left (B) or right (C) arrow and select tire size. Press
SELECT (D).
6. Press PROGRAM (A) to exit programming mode or press
SELECT (D) to proceed to next WINDROWER SETUP action.
CAB DISPLAY MODULE