MacDon M155, Инструкции по разгрузке и сборке

Страница: 134 / 272

215015
108
Revision A
1009066
CXXX
MXXX
WINDROWER SETUP?
NO/YES
A
B
C
Figure 4.41: CDM Programming Buttons
1. Turn ignition key to RUN, or start the engine.
2. Press PROGRAM (A) and SELECT (C) on the cab display
module (CDM) to enter programming mode.
•
WINDROWER SETUP? is displayed on the upper line.
•
NO/YES is displayed on the lower line.
3. Press right arrow (B) to select YES. Press SELECT (C).
•
SET KNIFE SPEED? is displayed on the upper line.
1009104
CXXX
MXXX
HAY CONDITIONER
NO/YES
A
B
C
Figure 4.42: Hay Conditioner Activation Shown
4. Press SELECT (C) until HAY CONDITIONER? is displayed on
the upper line.
•
NO/YES is displayed on the lower line.
5. Press right arrow (B) to select YES. Press SELECT (C).
6. Press PROGRAM (A) to exit programming mode or press
SELECT (C) to proceed to next WINDROWER SETUP action.
CAB DISPLAY MODULE