215620
203
Revision A
$
Figure 5.190: HPT Display
25. Press soft key 3 (A) to restore the header float.
NOTE:
If the header float is active, the icon at soft key 3 displays
Remove Float; if the header float has been removed, then
the icon displays Resume Float.
26. Shut down the engine, and remove the key from
the ignition.
5.5.3
Connecting R2 Series Rotary Disc Header Hydraulics and Electrical Systems
–
M1170 Windrower
Connecting the R2 series header's hydraulic and electrical systems to the windrower involves attaching the header
’
s knife
drive, pressure, return, case drain, and electrical connectors to the windrower
’
s receptacles.
IMPORTANT:
To prevent contamination of the hydraulic system, use a clean rag to remove dirt and moisture from all hydraulic couplers.
$
%
Figure 5.191: Left Cab-Forward Platform
1.
Approach platform (A) on the left cab-forward side of the
windrower and ensure the cab door is closed.
2.
Push latch (B), and pull platform (A) toward the walking
beam until it stops and the latch engages.