![background image](http://html.mh-extra.com/html/macdon/m1-series/m1-series_unloading-and-assembly-instructions_685709192.webp)
215620
180
Revision A
$
Figure 5.130: Hose Support Attachment
4.
Attach hose support (A) to the frame near the windrower
left cab-forward leg, and route the hoses under the frame.
NOTE:
Route the hydraulic hoses as straight as possible, and avoid
rub/wear points that could cause damage.
$
%
$
&
Figure 5.131: Knife Pressure Hose Positions
1 - Knife Pressure Hose in Storage Position
–
Rotary Configuration
2 - Hose to Knife Pressure Receptacle
–
Auger/Draper Configuration
5.
If you are switching from an auger/draper header to a
rotary header:
Disconnect hose (A) from knife pressure
receptacle (C) on the frame and move it to storage
location (B).