215620
106
Revision A
$
%
&
'
(
Figure 4.25: Console and HPT Run Screen
7.
Turn IGNITION switch (A) to the ON position; HPT
display (B) will light up. If the HPT is still booting up, wait
for WAIT TO START (WTS) symbol (C) to disappear before
trying to start the engine.
8.
Ensure that red PARK symbol light (D) is ON and that there
are no error messages on the screen.
9.
Press HORN button (E) three times prior to starting the
engine.
$
%
Figure 4.26: HPT Header Disengaged Screen
10. Turn the IGNITION switch to crank position (A).
NOTE:
When the engine starts and the header is not engaged, the
HPT displays header disengaged page (B).
IMPORTANT:
•
Do
NOT
operate the starter for longer than 15 seconds
at a time.
•
If the engine does not start, wait at least 2 minutes
before trying again.
•
If you crank the engine for more than 30 seconds within
a 2-minute period, the engine will lock the starter circuit
to prevent overheating, and a flashing WTS symbol will
appear on the display. Wait for the WTS symbol to stop
flashing before attempting to crank the engine again.
•
If the engine still does not start, refer to the windrower
operator
’
s manual.
