214325
256
Revision A
Figure 5.252: New Holland Combine Display
1.
Select HEADER RAISE RATE on combine display.
2.
Use + or
–
buttons to change setting.
3.
Press ENTER to save new setting.
NOTE:
The raise rate can be changed from 32 to 236 in steps
of 34. The factory setting is 100.
Setting Header Lower Rate to 50 (New Holland CR/CX Series)
If necessary, header lower rate (the automatic header height control button or second speed on header height
rocker switch of multifunction handle) can be adjusted.
NOTE:
Changes may have been made to the combine controls or display since this document was published. Refer to
combine operator
’
s manual for updates.
Figure 5.253: New Holland Combine Display
1.
Select HEADER LOWER RATE on combine display.
2.
Use + or
–
buttons to change setting to 50.
3.
Press ENTER to save new setting.
NOTE:
The lower rate can be changed from 2 to 247 in steps
of 7. It is factory-set to 100.
Setting Sensitivity of Auto Header Height Control to 200 (New Holland CR/CX Series)
NOTE:
Changes may have been made to the combine controls or display since this document was published. Refer to
combine operator
’
s manual for updates.
CAUTION
Check to be sure all bystanders have cleared the area.
Содержание FFT FD75
