PRE-DELIVERY INSPECTION
169603
37
Revision
B
6. Adjust
gap:
i. From inside endsheet, loosen nut (F) on
pin (G).
ii. Close endshield, and adjust position to
achieve the gap
‘X’
between the front end
of shield and header frame in accordance
with chart on previous page.
7. Open endshield, and tighten nut (F).
8. Check for a snug fit between top of shield
and header frame, and full engagement of
endshield on pin (G). If necessary, loosen
bolts on catch (H), and adjust catch as
required to reposition shield.
9. Tighten bolts on catch (H).
10. Close endshield.
G
F
H